| General Information |
 |
| Cool-Fit ABS is a complete system solution for secondary cooling and refrigeration piping systems. You can adapt the system solutions to your particular needs. For example white pre-insulated for food production halls or standard plastic pipe with control valves for pump houses or OEM chillers.
For refrigeration and cooling plants in general, using plastic pipe as the carrier system offers complete corrosion resistance and a cost effetive solution compared to traditional metal materials. |
|
| PUR Insulation |
|
| Cool-fit ABS pre-insulated pipe and fittings are delivered ready to install using high density PUR>45 kg/m3 as the insulation material, the PUR is CFC free and recyclable. |
|
| Jacket Pipes in White and Black |
|
The outer jacket in either black or white is manufactured from high density polyethylene (PE). PE offers extremely good impact resistance to oil splashes and grease or other external contamination. The PE is smooth, non-corroding and thus easy to clean with a long-life span.
White PE offers an aesthetic and hygenic alternative for internal systems, such as supermarkets or food production halls.
Black PE is UV resistant and thus ideally suited to outdoor applications and general use. |
|
| Typical Working Conditions |
|
| Cool-Fit ABS has a working temperatures ranging from -50ºC to +40ºC for pre-insulated and -40ºC to +60ºC for the standard ABS system, with a maximum working pressure of 10 bar (water at +23ºC).
|
|
| Typical Mediums |
|
Cool-Fit ABS can be used with the following:
- Chilled water and general water
- Salt solutions
- Glycol solutions
- Alcohol solutions
For compatibility of ABS to non-water mediums, please contact us.
|
|
| Not Recommended For |
|
| Cool-Fit ABS is not for use with primary gases such as ammonia, propane, R407, R22 and also not for use for compressed air systems. |
|
| Other Pre-Insulated Pipe available |
|
- Copper
- Stainless Steel
- Welded Steel
- Seamless Steel
- Galvanised Steel
- PEX
- PE
- PP
|
